Shallow form, made of thick G.I. sheet.

For serological water baths.

Hemispherical, made of thick aluminium/copper sheet, with a set of concentric rings and 2 handles.

Vertical sides, fitted with concentric rings, 90 x 125 mm (Ht. x Diam.)

Aluminium body, plastic feet, concentric rings, with constant level device and 1 kW heater with automatic cut-out , Size 145 x 200 mm (Ht. x Diam.). Complete with connector plug and 1 metre of 3 core cable.

With stirrer, double walled, inner chamber of size 430 x 230 x 265 mm made of stainless steel, outer chamber made of stove enamelled mild steel with insulation in between. Temperature is controlled by thermostat from 5°C above room temperature to 95°C, ±0.2°C. Stirrer is provided for continuous stirring, and a front glass window on one side for visibility of the sample. Supplied with contact thermometer, stirrer with 1/20 H.P. high speed motor and speed regulator, mains lead. Works on 220-240 V, 50 Hz.

Single wall, chamber made of stainless steel, having 75 mm holes and concentric rings at top with tubules for water level arrangement, 1 kW heater with cut-out device. Complete with connector plug and 1 metre of 3 core cable.

Double walled, inner chamber of stainless steel, outer made of stove enamelled mild steel. Top has 75 mm holes with concentric rings. Temperature range upto 100°C, accuracy ±1°C, Heater fitted with automatic cut-out device, thermostat, two indicator lights, mains switch. Works on 220-240V, 50 Hz

Double walled, inner chamber of stainless steel, outer made of stove enamelled mild steel, with insulation in between, Thermostatic temperature control from 5°C above room temperature to 95°C with accuracy ±0.5°C. Bath has a stainless steel dome cover,perforated and removable shelves, drain plug, two indicator lights, thermostat control knob , heater with automatic cut-out. Works on 220-240 V, 50 Hz. With connector plug and 1 metre of 3 core cable. Supplied without racks.