For effective administration of progressive resistance exercise to lower and upper extremities for the patients with impaired body balance, unique exerciser for the lower and upper extremities. Either Arms or Legs can carry out the pedaling movement. It can be fixed & adjusted in matter of seconds to limb size & to the degree of flexion or extension. The fully chrome plated unit with adjustable resistance is very light & easily portable and can be attached to any tubular chair, wheel chair or bed.

Frame work: Main unit should be made of 60mmx30mm rectangular chrome plated pipe and could be adjustable in seconds to limb size (legs or arms), frame should have attachment of 25mm dia pipe with two clamps to fix to a tubular chair for exercises.

Resistance; Pedaling movement in precision-machined cast iron clamp for resistance that can be varied through knob pedals should also have straps to hold the feet or hand.

Finish; Bright chrome plated finish with power coated clamps, provided with instruction manual. Rehabilitation machines are used for physical rehabilitation therapy.

Light weight made of Aluminum construction and well padded under the arm and hand grip PVC foam type, hand grip and height of the crutch is totally adjustable as per the requirement of the user, Best quality rubber PVC shoe to avoid slipping on the floor available in different sizes and colour.

All chrome plated tubular steel construction mounted on the wooden platform and fitted with wall bracket at the top wall mounting comes with adjustable swivel pulley block a set of joking weight and two handles with nylon ropes suitable for all shoulder elbow and chest exercises confirming ISI specification. Rehabilitation machines are used for physical rehabilitation therapy.

Elbow sticks made from aluminum frame duly anodized in golden colour very light weight provided with rubber foamed or wooden well fabricated grip handle , PVC rubber shoe provided on the slipping action on the floor, height of the stick totally adjustable with little affords and duly locked properly.

• Flatbed with imported bearing rollers.
• Multi function computer with pulse, speed, calories, distance and time function.
• Wheels on the front for portability.
• Adjustable incline.
• Complimentary water bottle, towel and lubricating oil for flatbed.
• Belt size 110cms x 33cms.

For grip strengthening exercises. Frame: Should be made of 10mm ×4mm thick chrome plated steel strip with calibration on upper bar (0 to 4c) and outer frame should be fitted on 75mm wide × 250mm long laminated wooden base. Chrome plated finished, metallic grip exerciser is fitted on a 50mm wide laminated base. Suitable for patients with very weak / infirm hand. Gives heavy resistance with six detachable springs. The upper bar is calibrated in centimeters and is provided with a needle to mark & record the daily progress.

To permit active flexion and extension exercises for fingers & wrist. Unit should consist of the following: Exercise Board: Wooden exercise board (15"×12"×3") with a storage drawer. The laminated Top should have 26 holes at different positions to fix aluminum pegs (3 pegs) and springs. Finger Compression Springs: A set of three springs (10cm long) of different tensions and each spring is fitted with color-coded aluminum tops and bases. Grip Springs: A set of three pairs of springs (14.5cm long) with different tensions. Pairs should be marked in different colors and have the hooks to be attached to pegs. & Springs. One set of wooden roller and disc with hooks. Finish: All springs should be chrome plated, Aluminum pegs be anodized and wooden box in natural polished. Rehabilitation machines are used for physical rehabilitation therapy.

• 1.5 H.P. Continuos power(2.5 peak)
• Adjustable Incline
• 5 Window computer with pulse.
• Safety Lock.
• Speed, Distance, Time, Calorie meter.
• Air step cushion deck.
• Belt size 36cms x 115cms.
• Extended size 145cms x 64cms x 142cms.
• Foldable size 59cms x 64cms x 142cms.
• Speed 0 to 12 kms (stepless).

• Jogger
• Rowing
• Vibrator
• Twister
• Cycle
• Sit up Board.

• The length of Parallel walking bar with wooden platform is 3.75 meters,hand rail made of chrome plated steel tuning 1.5" outer dia.
• Outer uprights made of thick steel tubing (2" dia).
• Mounted on a wooden platform with rubber inclination settings.
• Height adjustable with rubber from 30" to 44" and width from 15" and 25" adjustment can easily to done by mean of setting pins at the required holes and can further be stabilizing by tightening the screws.
• Comes with detachable polished teak wood abduction board, which fits on the holes in the middle of the platform steel uprights and hand rails are painted.

These balls were originally used in the 1960s by Swiss physiotherapists(hence the name "Swiss ball") to help children with cerebral palsy improve their physical skills, including balance. Since then, physical therapists have discovered many healthful uses for the balls. In Europe and United States, Doctors have been using and developing ball exercises for therapeutic fitness since as early as 1973. A few exercise performed by these balls include:

• Static & dynamic strengthening of joint and spinal mobility.
• Cardiovascular fitness through low impact aerobics.
• Facilitating postural correction at an unconscious level increasing proprioception and kenesthesia.
• Mildline orientation and dynamic trunk control .
• Neuro-motor learning and coordination.
• To develop anti gravity posture.(Tonic tone).

These balls in neurological conditions are very useful

To improve balance and equilibrium.
To control vestibular system and arousal.
For proper weight shifts.
It improves dissociation and relaxes the muscles.
It is very useful for proprioceptive input.
A must for every parent with small babies and doctors for their clinical use.
Available in the following sizes: 45cms, 55cms, 65cms, 75cms, 85cms, 100cms

Frame Work: Frame should be made of 30mm / 35mm square tube of 16-gauge wall thickness. Overall size of the unit is 950mm×715mm×1370mm high. Oven baked finish. Torque Unit: Chrome plated torque unit should consists of two lever arms one be fitted with weight holder while the other with foam roller to provide contact with the patient Arms of square tube are calibrated for proper positioning of the weight & roller. Should have scale to measure the angle of rotation. Could be fixed on right or left side of the table. Seat & Back: Seat & back be padded with 35mm thick form & covered with good quality of Rexene. Size 550mm×610mm. Back should slide on chrome-plated pipes to adjust the distance from the seat. Accessories: Six weight plates of 1 kg. Each. Removable strap for thigh support. PU foam armrests. A plastic handle for arm exercises.

Also called "Supinator-pronator" and used effectively to promote pronation and supination of the wrist. Grip Unit: Unit should have single grip hold, precision machined Cast Iron drum, fitted with brake shoes for resistance and smooth plastic handle to grip. The resistance level should be measurable. Drum should also be fitted with a d dial protractor to measure the range of motion. Wall Fixing: Unit should have wall-fixing arrangements with a 20mm chrome plated square tube of 50cm length to adjust the height of grip unit according to the need of patient. Finish: Grip unit should have oven baked black finish with working parts in bright chrome plated finish.