CPM is a method to treat joints of the lower limb for post operation recovery and gives excellent results. The device is programmed for septic arthritis, ligaments tendon healing and also for treatment of intra articular fractures.

Salient Features :
Electronic controls enables for range of motion.
Adjustable flexion angle from 0o to 110o.
0 to 30 minutes countdown timer.
Patient safety switch to stop and reverse the motion.
Manual up/down:Manual flexion and release

Technical Specification:
Mains Input : 20V AC 50Hz
Power : 20 watt
Time : 0 to 30 minutes
Flexion Angle : Adjustable from 0o to 110o
Delay timer : 0 to 10 second
Weight : 9 Kg

CPM is a method to treat joints of the lower limb for post operation recovery and gives excellent results. The device is programmed for septic arthritis, ligaments tendon healing and also for treatment of intra articular fractures.

Salient Features :
Electronic controls enables for range of motion.
Adjustable flexion angle from 0o to 110o.
0 to 30 minutes countdown timer.
Patient safety switch to stop and reverse the motion.
Manual up/down:Manual flexion and release

Technical Specification:
Mains Input : 20V AC 50Hz
Power : 20 watt
Time : 0 to 30 minutes
Flexion Angle : Adjustable from 0o to 110o
Delay timer : 0 to 10 second
Weight : 9 Kg

This diagnostic muscle stimulator is useful for treatment of muscle weakness, functional paralysis resulting from Traumatic Neurosis, Hysterical of Neuropraxia, Flaceed Paralysis, Spastic Paralysis, Cardio Vascular disorders, Muscle trains etc. This diagnostic muscle stimulator with Glavanic, Interrupted Galvanic, Faradic and Surge faradic currents comes in a compact metal housing duly fitted in a briefcase along with standard accessories. This device can also be used to plot S.D. curve due to its multi step frequency and duration of pulse width.

Accessories:
Standard accessories consist of plastic coated handle with cable, ball electrode, one patient leads with plate electrodes

Technical Specification:
Input Voltage : 220V AC 50Hz
Maximum output 120 Volts, smooth intensity control
i) Pulse Width: 10 micro/sec. to 300 milli sec. Pulse duration step control .01 to 300 milli sec.,
ii) Frequency: 6 Pulse per min. to 30 pulse per min. 1 pulse/milli sec. to 100 pulse milli sec.

Faradic : Comprises 40 pulses per second, each pulse of 0.9 ms

Surge Faradic : Two isolated controls are provided for changing contraction & rest period

Intensity : Common intensity control for all four mode of therapy

Mode Selector : Logic selector for selection of each therapy mode. An analog meter is provided for display of intensity for all four modes

This diagnostic unit is useful for treatment of muscle weakness, functional paralysis resulting from Traumatic Neurosis, Hysterical of Neuropraxia, Flaceed Paralysis, Spastic Paralysis, Cardio Vascular disorders, Muscle trains etc. This muscle stimulator with Glavanic, Interrupted Galvanic, Faradic and Surge faradic currents comes in a compact metal housing duly fitted in a briefcase along with standard accessories. This device can also be used to plot S.D. curve due to its multi step frequency and duration of pulse width.

Accessories:
Standard accessories consist of plastic coated handle with cable, ball electrode, one patient leads with plate electrodes

Technical Specification:
Input Voltage : 220V AC 50Hz
Maximum output 120 Volts, smooth intensity control
i) Pulse Width: 10 micro/sec. to 300 milli sec. Pulse duration step control .01 to 300 milli sec.,
ii) Frequency: 6 Pulse per min. to 30 pulse per min. 1 pulse/milli sec. to 100 pulse milli sec.

Faradic : Comprises 40 pulses per second, each pulse of 0.9 ms

Surge Faradic : Two isolated controls are provided for changing contraction & rest period

Intensity : Common intensity control for all four mode of therapy

Mode Selector : Logic selector for selection of each therapy mode. An analog meter is provided for display of intensity for all four modes

This units is latest development with fully SOLID STATE Electronic circuitry and is very light weight compact and portable. The Sound Head with a special transduces is designed to keep a very good skin contact for deep Ultrasound Therapy. The Ultrasonic waves differ from other electromagnetic radiation such as Shortwave, Microwave etc. as the energy is propagated as mechanical vibrations and gives a messaging effect to the deep tender part of the muscle. This is very neuromuscular and muscular-skeletal diseases including Arthritis, Sinusitis etc. The sound head generator minimizes heat and thus eliminates any discomfort of the patient. The unit is fitted with a Timer Switch to put the completion of predetermined dosage time. It operates on 220/240 Volts A.C. The treatment head gives continuous or pulsed Ultrasound Wave obtained through a selective switch. In Analogue model upto 15 Watts in continuous and 21 Watts in pulsed modes. Supplied complete with Ultrasound Applicator (Sound Head), Main Line Cord, 5 Spare Fuses and Foam Rexene Cover.

Technical Details
Power Output : 2.5W/CM2 in continuous mode, 3.5W/CM2 in pulse mode
Output mode : Continuous mode & pulse mode
Timer : 0 to 30 mins
Main Supply : 220 Volts 50 cycles
Output : Meter display

A newly improved traction table suitable Most commonly and globally used modality designed to run many hours constantly to compete the rush of patient. This heavy duty device has its versatility for continuous use

Technical Specification:
Power Output : 17 watt continuous, 22 watt pulsed, 29 watt pulsed
Operating Frequency : 1 Mhz
Input Voltage : 220/240 Volts A.C. 50Hz

Applications :

• For lumber Traction.

Salient Features :

• Dual Channel TENS mode Low and high devices are used for symptomatic relief and
• management of chronic (long-term).Intractable pain and an adjunctive treatment in the
• management of post surgical and post surgical and post traumatic acute pain problems

• The electrostatic intermittent traction machine is an accurate and sturdy unit. Improved reliability has been achieved using solid state Electronics. The Silent motor is smooth, reliable and lasting. The electronic traction is of solid construction and is easy to use the traction force can be easily adjusted from 5 to 45 kgs. The traction froce can be increased 90 kgs. using traction force doubler. The treatment time is electronically adjusted and displayed by LEDS digitally. At the end of treatment time the alarm comes up and traction stops.
• Traction Mode Selector : Operates in static (Constant Traction) or in intermittent traction mode.
• Hold Time/Rest Time : When the traction is in intermittent mode HOLD & REST time can be selected with rotary switch
• Traction Force Selector : The traction force of 5 to 45 kgs, is selected with a rotary switch, with double upto 90 kgs
• Treatment Time Selector : Displayed LEDS, switches off the unit after treatment time
• Mounting : Wall or table mounting

Specifications:
Voltage : 220V, 50 Cycle

Force : Doubler upto 90 kgs.
Treatment : 1, 5, 10 sec.
Mounting : Table or wall mount.
Traction : 5 to 45 kgs with
Hold Time : 20, 40, 60 sec.
Time : Display

Standard Accessories :
Ultrasonic applicator : 1 Pc.
Applicator Stand : 1 Pc.
Space fuse : 5 Pcs.
Machine cover : 1 Pc.
Jelly bottle : 1 Pc.

Hydrocollator is the modality of thermotherapy. It is thermostatically controlled machine to warm the water at a specific temperature of 100oF to 110oF. The inner chamber of unit is made of stainless steel and outer is heavy duty mild steel duly oven back painted and mounted on a M.S. frame fitted with heavy duty casters.

Salient Features :

• Thermostaticlly controlled unit.
• Concealed air heaters which does not come in the direct contact of water and chamber.
• Temperature maintain indicator and mains indicator.
• S.S. chamber to avoid oxidation due to continuous use of water.
• Silica gel packs of different shape and size.

Hydrocollator is the modality of thermotherapy. It is thermostatically controlled machine to warm the water at a specific temperature of 100oF to 110oF. The inner chamber of unit is made of stainless steel and outer is heavy duty mild steel duly oven back painted and mounted on a M.S. frame fitted with heavy duty casters.

Salient Features :

• Thermostaticlly controlled unit.
• Concealed air heaters which does not come in the direct contact of water and chamber.
• Temperature maintain indicator and mains indicator.
• S.S. chamber to avoid oxidation due to continuous use of water.
• Silica gel packs of different shape and size.

• Backache
• Bruises & Sprains
• Rheumatic Pains etc.
• Wounds, Inflamed skin, Boils, Insect Bites
• Teeth extraction, Chiblains, Numb-fingers
• Infrared for pet animals
• Loss of Hair, Massage, Beauty Treatment

• Backache
• Bruises & Sprains
• Rheumatic Pains etc.
• Wounds, Inflamed skin, Boils, Insect Bites
• Teeth extraction, Chiblains, Numb-fingers
• Infrared for pet animals
• Loss of Hair, Massage, Beauty Treatment

The interferential therapy offers advance technique to reduce pain and to exercise muscles with low frequency current. In I.F.T. two medium frequency currents are used crossing to each other at a point to produce a low frequency current Area of

Application:
Deep sited pain, sports injuries, pain of rheumatoid arthritis, pain of osteo arthritis, pain of osteo arthritis, miscular weakness etc

Salient Features:
The therapy modes:(a) 4 pole interferential, (b) 4 pole vector, (c) 2 pole modulated
Digital timer with alarm which cuts off when display read zero.
Dual intensity display i.e. CH-1 digital display and CH-2 LED display.
Sweep program.
Balance control of intensity.

Technical Specification:
Medium frequency : 2 Khz & 4 Khz
Base frequency : 0 - 150 Hz
Sweep frequency : 0 - 100 Hz

The interferential therapy offers advance technique to reduce pain and to exercise muscles with low frequency current. In I.F.T. two medium frequency currents are used crossing to each other at a point to produce a low frequency current Area of

Application:
Deep sited pain, sports injuries, pain of rheumatoid arthritis, pain of osteo arthritis, pain of osteo arthritis, miscular weakness etc

Salient Features:
The therapy modes:(a) 4 pole interferential, (b) 4 pole vector, (c) 2 pole modulated
Digital timer with alarm which cuts off when display read zero.
Dual intensity display i.e. CH-1 digital display and CH-2 LED display.
Sweep program.
Balance control of intensity.

Technical Specification:
Medium frequency : 2 Khz & 4 Khz
Base frequency : 0 - 150 Hz
Sweep frequency : 0 - 100 Hz

This compact Solid-state Microprocessor Controlled unit, with digital timer and intensity display is useful for functional paralysis resulting from traumatic neurosis, Hysterical of Neuropraxia, Flaccid Paralysis, Spastic Paralysis, Cardio-vascular disorders and Muscle Strain etc.This Therapeutic Muscle Stimulator has Galvanic, Interrupted Galvanic, Faradic and Surge Faradic currents. This unit is housed with ABS moulded cabinet. Salient Features Microprocessor controlled Pulse durations: 03, 1, 10, 30, 100, 300 ms Pulse Repetitive Freq.: 0.3, 1, 3 seconds Intensity variations: 0~130 Volts Technical details Weight: 1.6 Kg. Height : 139.7 mm Width : 266.7 mm Depth : 190.5 mm Voltage : AC 100~260 Protection Class - I Complies with IEC 601-1 Option for Built-in rechargeable battery