Portable, precision automatic knife sharpener with timer 0-60 minutes to adjust sharpening time. This equipment can sharpen all microtome knives up to 140 mm in length. Complete with one universal holder, two honing plates, one bottle honing glass compound, one knife inspection block and one re-dressing pad but without micro abrasives.

A handy and simple model with wide flat top, suitable for sectioning of fresh tissues. Screw drum is graduated in 100 close divisions and will cut the specimen in steps of 10n microns each. Complete with a single edged razor blade.
 

with differential screw, screw drum is graduated in 50 wide divisions.
 

Specially designed for cutting paraffin embedded specimens in varying thickness upto 50 microns, in steps of 5 microns. Cast aluminium housing with stainless steel top, complete with table clamp, fine brush, 4 microscopic slides, 1 pkt razor blades, in wooden box, with instructions.
 

Size 20 cm

Pair,made of brass. size 50x25x15 cm.
 

Mounted in wooden frame ,for final stropping of the knife
 

200 ml bottle For coarse honing
 

200 ml bottle For fine honing

For rotary microtomes fabricated from fine grain special steel, heat treated and tested for microstructure, both sides wedged, supplied with back and handle
 

For rocking microtomes
 

Set of three different object holders for rocking microtomes.

A fully dependable sectioning equipment designed for precise sectioning of tissues up to 1 micron thickness. It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron. Prominent features include independent feed mechanism with automatic safety device, universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen and full swing protective cover for easy cleaning and lubrication. The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques. The microtome razor is fabricated from fine grain steel alloy tested for microstructure and is heat treated to maintain its sharpness and strength. Supplied complete with one razor 120 mm with back and handle, a set of three object holders, one honing plate, oil can, dust cover, in wooden cabinet.

High quality carbon steel, flat on one side, hollow ground on the other, right handed.

A simple attachment permitting a safety blade in place of microtome knife,suitable for  utting accurate sections