Cast iron, with tapped hole M10 x 1.5 metric thread,in centre of short side, stove enamelled.

Cast Iron, A-shape, with M10 x 1.5 tapped hole, stove enamelled. Size is the distance apart of feet.

Mild steel, die pressed, chrome plated, can hold stand rod upto 18 mm diam. and clamp rod upto 10 mm diam.

Cast-iron, stove enamelled, with nickel plated clamping screws, can accommodate rods upto 12 mm.

Pressure die cast aluminium alloy. With offset jaws, nickel plated brass clamping screws, to hold rods upto 16 mm diam.withstands heavy clamping pressure.

Aluminium alloy, holds rods upto 12 mm, swivels and locks at any angle.

Aluminium,with steel rod,cork lined jaws,for holding burettes and other objects of diam. upto 60 mm,

Pressed metal, cork lined jaws, can open upto 50 mm.

Die cast aluminium, with plated brass inserts, accepts articles upto 70 mm diam, rubber covered jaws.

For precise adjustment of height of equipment above laboratory table,with screw operated scissor action mechanism,actuated e handwheel.The top is 15x15 cm with a threaded hole for a laboratory rod.

Mild steel base, stove enamelled, fitted with one levelling screw and nylon feet, with chrome plated mild steel rod.

Iron, with stem.

Iron, with integral boss to accept rods upto 12 mm.diam. Boss is fitted with a plated thumb screw.

Diam. 12 mm, with M10 x 1.5 thread to fit retort stand base.

Pressure die cast aluminium alloy, other parts are of plated brass, cork lined, ensures firm grip at all angles of opening, opens upto 90 mm, with 250 x 8 mm nickel plated mild steel rod.