Made of Brass. Accurate. Hanger made of brass wire with hook. Slot in the masses makes it easier to slide the masses in and out of hanger, without the masses sliding off the hanger. Available in different configurations, as needed

Short triangular beam, with rider scale. The beam supports are extended and relieve the agate knife edges when at rest. Pillar is highly finished and removable pans are suspended by stirrups from double hooks. The balance is mounted in a polished wooden case, fully glazed. Complete with rider slide, levelling screws. Capacity 200 gm, sensitivity 0.1 mg.

For relative density experiments, 120 x 50 x 50 mm

Advanced, Beam engraved with a rider scale, for use with 10 mg rider, balancing nuts, agate bearings and knife edges. Fitted on a wooden board in a polished wooden case. Capacity 200 gm, sensitivity 0.5 mg.

Brass, chrome plated, complete set with light alloy fractional weights,10 mg rider and forceps, in a nicely polished case.Accuracy class B

Stainless steel, complete with aluminium fractional weights, rider and brass forceps, in a nicely polished velvet lined case.

Brass, chrome plated, in case with lid, complete set with forceps and light metal fractional weights.

Brass, chrome plated

Brass, chrome plated

General purpose balance for student use. Cast alloy beam fitted with balancing nuts, agate bearings and knife edges. The hangers have double hooks for specific gravity xperiments. Detachable nickel plated brass pans, enamelled central pillar, plumbline, mounted in polished wooden case with levelling screws. Capacity 250 gm, sensitivity 2 mg.

Single Pan balance of capacity 311g and sensitivity 0.01g. The stainless steel pan has two pouring spouts and handle, and rests on a wire stirrup suspended from the beam. Zero adjustment through a simple knob on its left side. Total four beams, each with non-removable, center indicating sliders, graduated to 1g ´ 0.01g, 10g ´ 1g, 100g ´ 10g and 200g ´ 100g. Magnetically damped movement of the beam ensures rapid weighing.
 

Single Pan balance of capacity 310g and sensitivity 0.01g. The stainless steel pan has two pouring spouts and handle, and rests on a wire stirrup suspended from the beam. Zero adjustment through a simple knob on its left side. Total two beams, each with non-removable, center indicating sliders, graduated to 100g ´ 10g and 200g ´ 100g, and a direct reading dial graduated to 10g ´ 0.1g with a vernier reading to 0.01g. Magnetically damped movement of the beam ensures rapid weighing
 

Single pan, to weigh up to 2610 gm. The balance has three beams with sliding masses giving weighing capacity of 610 gm which can be increased to 2610 gm with three supplementary masses. Stainless steel pan of 150 mm diam. Provided with spring loaded zero adjuster & magnetic damping for rapid weighing.

Single pan, to weigh up to 2610 gm. The balance has three beams with sliding masses giving weighing capacity of 610 gm which can be increased to 2610 gm with three supplementary masses. Stainless steel pan of 150 mm diam. Provided with spring loaded zero adjuster & magnetic damping for rapid weighing.

Beam with central knife edge and pointer, with two pans and heavy base.